In-Line Sensor for Monitoring Suspended Solids and Sludge Density, air bubble tolerant, removable under pressure, low cost of ownership

Ideal For: Sludge inlet monitoring, Returned activated sludge, De-sludging control

The SoliTechw² IL Sensor provides reliable and repeatable, continuous in-line measurement of sludge density, suspended solids and turbidity. The sensor is installed through a mounting boss onto any pipeline that is larger than 65 mm diameter. The sensing element is positioned flush with the inside wall of the pipe, this ensures that the optical surface is kept clean by the flow passing the sensor and that the sensor does not cause an obstruction to the flow. The optical element has a sapphire window, this offers excellent resistance to fouling and to damage caused by the abrasion from particles in the flow.

The sensor is suitable for a variety of applications including the auto de-sludging of primary and final settlement tanks, where reliable sludge density measurement ensures that downstream treatment processes can operate at their optimum level. When detecting turbidity the sensor can give immediate warning of a filter failure or of contamination of a process by suspended particles. The sensor is also well suited to the monitoring of sludge at tanker intake points, giving an excellent indicator of the strength of the incoming liquor allowing both process adjustments and the charges to be applied to the tanker operator.

The sensor uses infrared back-scatter at 960nm, the light is transmitted and received through a lens that is optically split. The infrared measurement principle allows the sensor to work in applications where entrained air prevents the use of ultrasonic sensors.

Call 03 8795 7711 to discuss your water monitor requirements.