Partech Water Measurement

 The 7200 Monitor combines with all the Partech infrared sensors to give a cost-effective solution to measurement of : Suspended Solids; Turbidity , Sludge Density. The Monitor provides a large character display of the measured value combined with a scrolling information bar showing measurement status.The menu structure includes set up wizards that will take... more »

 
The Turbi-Tech 2000LA Sensor has been designed for use in aeration systems typically monitoring Mixed Liquor Suspended Solids also known as Activated Sludge where solids are typically in the range of 1,500 to 3,500 mg/l.. The sensor can also measure Returned Activated Sludge (R.A.S.), Surplus Activated Sludge (S.A.S.) and Suspended Solids or Turbidity in any... more »

 
The Turbi-Tech 2000LS Sensor is designed to monitor the levels of Suspended Solids or Turbidity typically found in Final Effluent from municipal and industrial wastewater treatment plants. It is also capable of monitoring solids in the intake to both effluent and drinking water treatment processes. The normal operating range is between 0 - 50 mg/l and 0... more »

 
The IL55BV2 Sensor provides reliable and repeatable, continuous in-line measurement of sludge density, suspended solids and turbidity. The sensor is installed through a mounting boss onto any pipeline that is larger than 65 mm diameter, the sensing element is positioned flush with the inside wall of the pipe. This ensures that the optical surface is kept clean by... more »

The Soli-Tech 20 sensor is designed for the measurement of Suspended Solids, Sludge Density, or Turbidity in a wide range of applications, including Activated Sludge (Mixed Liquor), and Final Effluent. It is an ideal low cost option to the self-cleaning Turbi-Tech 2000 sensors where fouling in not an issue or where manual cleaning can easily be carried out. The Soli-Tech... more »

 
The WaterWatch2300 Monitor combines with the WaterWatch2300 series of Turbidity and Suspended Solids sensors to give a cost-effective solution to the measurement of those parameters. The WaterWatch Turbidity and Suspended Solids sensors provide an extremely stable zero point due to the mechanical design of the flowcell. This coupled with the dry calibration standards... more »

 The reliable measurement of Turbidity, especially at very low levels requires sensor a capable of maintaining it's performance over extended periods of time. The WaterWatch2310 Sensor has been designed with this in mind, and features an automatic self cleaning mechanism It can also be equipped with a sample presence detector and a de-bubbler if required. By making this... more »

 
The 740 Monitor provides, quick and accurate readings of Suspended Solids, Sludge Blanket Level, and Turbidity, via an intuitive menu structure from a totally portable package. The robust IP65 enclosure incorporates a security strap and protective case to prevent accidental dropping, impact damage and abrasion of the display surface. The display itself is a high... more »

 
The MicroMac Analyser is a fully featured system designed for reliable and accurate monitoring of a wide range of parameters. This version is configured to measure Ortho-Phosphate using the standard Blue Book 'Molybdenum Blue' method. A wide range of other configurations are available including Total Phosphate, Ammonia, Nitrate, Iron, Aluminium, and Total Oxidisable... more »

The MicroMac 1000 is an on-line portable analyser, available either in mono or sequential multi parametric configuration, providing the highest level of analytical automation, based on combined colorimetric and fluorimetric analytical methods.

The MicroMac 1000 is the only available high sensitivity multi parametric portable analyser in the market; it uses the well known... more »

The ASLD 2200 is a fully automatic sludge blanket level detector primarily designed for the water and waste water industry but could be applied to other types of process. It utilises a servo-driven sensor which continually tracks the settled interface and produces a 4-20 mA output which is proportional to the depth of the blanket. The ASLD is supplied with either a Infrared... more »

The 8100 Monitor provides a reliable method of detecting the sludge blanket level in clarifiers and settlement tanks, or increasing levels of suspended solids or sludge density in a large range of processes.Control of the sludge blanket level is essential to ensure discharge consent compliance and efficient control of the treatment process. If the sludge blanket in a settlement... more »

The 8200 Monitor provides a reliable method of detecting the sludge blanket in settlement tanks or increasing levels of suspended solids or sludge density in a large range of processes. Control of the sludge blanket is essential to ensure discharge consent compliance and efficient control of the treatment process. If the blanket in a settlement tank is allowed to rise to... more »

The Soli-Tech 20 Sensor is designed for Sludge Blanket detection and monitoring. It is suitable for use in both wastewater (sewage) and water treatment processes, and can be used on Final and Primary Settlement Tanks, as well as Clarifiers and Humus Tanks. The Soli-Tech 20 Sensor can also be applied in Suspended Solids, Sludge Density and Turbidity, please see the separate... more »

The 715 Portable provides a simple, low cost method of spot checking the sludge blanket level in a wide variety of settlement tanks. The cable reel design enables the user to store the cable without needing additional carrying bags or cleaning materials. The sludge blanket is detected by winding the sensor down into the tank, the audible tone will change and the LED illuminates... more »

 Handy Polaris – a breakthrough in functionality. Polaris is the first of a new generation of Handy Meters! As with the first Handy you can switch it on , put it in the water and measure, but measurements made with the Polaris are supported by a range of advanced functions designed to make things even easier: large Display; automatic calibration; choice of units;... more »

 
The 840 Dissolved Oxygen Transmitter has been designed to provide accurate, highly reliable measurements in difficult highly fouling applications. The specifically designed sensor utilises a rugged, 100 micron membrane, in combination with a unique electrolyte to provide excellent long term stability, without the need for sensor replenishment or replacement. The... more »

 The 810 Dissolved Oxygen Transmitter has been designed to provide accurate, highly reliable measurements in difficult highly fouling applications. The specifically designed sensor utilises a rugged, 100 micron membrane, in combination with a unique electrolyte to provide excellent long term stability, without the need for sensor replenishment or replacement. The sensor... more »

 
Contamination of water courses by visible oil is a problem that requires fast, reliable detection to prevent damage to either the local environment or a treatment process. If oil is allowed to enter a river then wildlife can be harmed, if the oil then enters a drinking water plant damage can be caused to the processing system or more critically the quality of the... more »

 WaterWatch2950 uses the 254nm UV absorption method for detecting organic pollution. Using a multi wavelength system combined with high quality strobed light source interference from turbidity is removed. The light source has a very long lifetime and exhibits a very stable output. In the measurement phase the sample stream passes through the instrument and a continuous... more »