This easy to use and exceptionally easy to install Monitor interfaces to all sensors in the Partech WaterWatch 2 range.

The 7300w²  Monitor is an economical way to simultaneously monitor multiple sensors for multiple parameters. With a straightforward, intuitive user interface, no specialist training is required and thanks to the advanced serial communications if either the sensor or the monitor requires replacement, the calibration and configuration is stored and can be copied to a new sensor.

Ideal for: Turbidity, pH, Redox, Dissolved Oxygen, Oil on Water, Sludge Density, Suspended solids

Should you require additional measurement points or parameters, the Monitor can be re-configured to interface to the additional hardware.

Whether you are monitoring water, wastewater, industrial effluent or surface water the 7300w²  Monitor will give you a cost effective way to simultaneously monitor multiple parameters. As an example you could monitor Dissolved Oxygen and Suspended Solids in an Activated Sludge Plant or pH and Turbidity at a Treatment Works Outfall.

The initial configuration of the 7300w²   accommodates up to 2 sensors, with additional sensors catered for by the addition of Expansion Boxes. Depending on the practical aspects of your site, around 8 sensors would be considered a sensible maximum, however it is possible to expand past this.

Features

• Accommodates multiple sensors
• Accommodates multiple parameters
• Highly Intuitive Interface
• No specialist training required.
• Easily upgradeable for additional sensors or parameters without having to replace the Monitor hardware.
• Calibration and configuration data can be copied from one sensor to another (reducing the configuration time when replacing sensors)
• Compatible with all sensors in the Partech WaterWatch2 range
• Large graphical display visible even in bright sunlight.
• Site performance trends over a week
• Reliable, large format membrane keypad is ideal for outdoor installations and can be used even while wearing gloves.
• Available for a wide range of installation options, including handrail brackets.
• PID Control
• 4-20mA and Relay Outputs
• Profibus DP Communications
• 90-264 VAC or 9-36 VDC
• Power Supply
• Full Dosing Control
• Triple Validation    

Compatible Sensors.

TurbiTech LA Sensor- Self Cleaning Sensor for Suspended Solids Monitoring

TurbiTech LS Sensor- Self Cleaning Sensor for Suspended Solids & Turbidity Monitoring

SoliTech IL Sensor- In-line Sensor for Monitoring Suspended Solids & Sludge Density

OxyTech OPT Dissolved Oxygen Sensor- Optical Sensor for Dissoled Oxygen Monitoring

OxyTech GAL Dissolved Oxygen Sensor- Galvanic Sensor for Dissolved Oxygen Monitoring

WaterTech pH, Redox & Temperature- Combined Sensor for pH, Redox & Temperature Monitoring

WaterTech C4E Conductivity & Salinity Sensor- Combined Sensor for Conductivity, Salinity & Temperature

OilTech Oil on Water Sensor- Detection of Floating Visible Oil Pollution

ColTech Sensor- Sensor for Apparent Colour Monitoring